Heavy Duty Die Springs - Durable Coil Springs from China Suppliers | Reliable Factory Solutions for High Stress Applications
Features and Benefits of Die Springs
- Shot-peened for extended life.
- Preset to prevent length loss in operations.
- Powder Coated for corrosion resistance and color coded for ease of identification.
- Closed and Ground Ends to provide appropriate squareness and adequate large bearing surface and will stand on either end.
Applications
Die Springs are not solely used in dies but applications such as oil and gas drills, clutches, brakes, farm machinery and aircraft mechanisms. They are ideal for use as heavy duty compression springs for any high stress, heavy load application.
Tips for Selecting
- Determine if springs will be used for short run, average cycle long run, rapid cycle or extra stress.
- Use as many springs in the die as space permits with the least amount of deflection.
- The more rapidly a spring is cycled, the greater the need to operate within the ideal operating range.
- Make sure hole and rod sizes are properly matched with the spring. Faulty spring guidance will cause buckling and possible spring failure.
- Preventive maintenance on dies should be performed on a regular basis and die springs should be replaced at appropriate intervals to prevent downtime.
- Replace all springs in a die at the same time. This will insure an even distribution of the load.
- Do not rework die springs by grinding the inside or outside diameter or by cutting off coils. This could result in premature spring failure and possible die damage.
Configurations
SMS Spring offers FIVE color-coded families of Die Springs, based on Load.
Medium Load:
Color Code Gray
Medium Plus Load:
Color Code Beige
Medium Heavy Load:
Color Code Purple
Heavy Load:
Color Code Black
Extra Heavy Load:
Color Code Orange
Frequently Asked Questions (FAQ)
What are the primary benefits of using die springs?
Die springs are shot-peened for extended life, preset to prevent length loss, and powder-coated for corrosion resistance and easy identification.
In which applications can die springs be used?
Besides dies, they are ideal for oil and gas drills, clutches, brakes, farm machinery, aircraft mechanisms, and any high-stress, heavy-load application.
How can I prevent downtime when using die springs?
Perform preventive maintenance on dies regularly and replace die springs at appropriate intervals. Always replace all springs in a die at the same time to ensure even load distribution.
Is it acceptable to modify or rework die springs?
No, you should never rework die springs by grinding the inside/outside diameter or by cutting off coils, as this could result in premature failure and die damage.
Why is it important to match hole and rod sizes with the spring?
Properly matched hole and rod sizes provide correct spring guidance. Faulty guidance will cause buckling and possible spring failure.
How are the different load capacities of die springs identified?
They are identified by a color-coding system: Gray (Medium Load), Beige (Medium Plus), Purple (Medium Heavy), Black (Heavy), and Orange (Extra Heavy).


